Welch-allyn 5091-45 Wall Sphyg Conversion Kit, Instructions

5091-45

Wall Sphyg Conversion Kit

Instructions

1. Remove the gauge and bracket from the wall.

2. Remove the bracket from the gauge by pressing the ears of the bracket

inward about 1/8” to disengage them from the pivot pins in the case.

Remove the pivot pins from the case and discard them.

3. Drill out the 5/32” hole in the end of each ear of the bracket to 1/4” diam-

eter.

4. To reattach the bracket to the case: place the bushings in the 1/4” diame-

ter holes drilled in the bracket as shown in the illustration. Place the

bracket and bushings between the ears of the case. Insert the case as

shown in the illustration. Tighten the lock nuts on the machine screws to

secure the assembly. Tighten the lock nuts enough to hold the plastic

bushings snugly against the case. The bushings are long enough to keep

the head of the machine screws from tightening against the bracket. This

allows the gauge to pivot freely about the plastic bushing.

5. Reattach the gauge and bracket to the wall.

5091-45

Wall Sphyg Conversion Kit

Instructions

1. Remove the gauge and bracket from the wall.

2. Remove the bracket from the gauge by pressing the ears of the bracket

inward about 1/8” to disengage them from the pivot pins in the case.

Remove the pivot pins from the case and discard them.

3. Drill out the 5/32” hole in the end of each ear of the bracket to 1/4” diam-

eter.

4. To reattach the bracket to the case: place the bushings in the 1/4” diame-

ter holes drilled in the bracket as shown in the illustration. Place the

bracket and bushings between the ears of the case. Insert the case as

shown in the illustration. Tighten the lock nuts on the machine screws to

secure the assembly. Tighten the lock nuts enough to hold the plastic

bushings snugly against the case. The bushings are long enough to keep

the head of the machine screws from tightening against the bracket. This

allows the gauge to pivot freely about the plastic bushing.

5. Reattach the gauge and bracket to the wall.

Plastic

Bushing

Bracket

Machine

Screw

Lock Nut

Case

4341 State Street Road

Skaneateles Falls, NY 13153 USA

Tel: 315-685-4560 or 800-535-6663

Fax: 315-685-3361

www.welchallyn.com

95P314 Rev B

Plastic

Bushing

Bracket

Machine

Screw

Lock Nut

Case

4341 State Street Road

Skaneateles Falls, NY 13153 USA

Tel: 315-685-4560 or 800-535-6663

Fax: 315-685-3361

www.welchallyn.com

95P314 Rev B

Wall Sphyg Conversion Kit 1

Podsumowanie treści

Strona 1 - Wall Sphyg Conversion Kit

5091-45Wall Sphyg Conversion KitInstructions1. Remove the gauge and bracket from the wall.2. Remove the bracket from the gauge by pressing the ears of

Komentarze do niniejszej Instrukcji

Brak uwag

Welch-allyn 5091-45 Wall Sphyg Conversion Kit, Instructions - Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Ekwipunek Welch-allyn 5091-45 Wall Sphyg Conversion Kit, Instructions - . Welch Allyn 5091-45 Wall Sphyg Conversion Kit, Instructions - Installation Guide User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Welch-allyn 5091-45 Wall Sphyg Conversion Kit, Instructions - Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Ekwipunek Welch-allyn 5091-45 Wall Sphyg Conversion Kit, Instructions - . Welch Allyn 5091-45 Wall Sphyg Conversion Kit, Instructions - Installation Guide User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Welch-allyn 5091-45 Wall Sphyg Conversion Kit, Instructions -